Luxury & Precision P6 Specifications
- Dimensions/weight: 124×67.3x20mm/248g
- Display 3.5-inch, IPS screen, resolution 480×320
- Body material: aviation aluminum
- Rear cover: glass
- Main control: 1812C
- DAC: Fully discrete R2R decoding
- Crystal oscillator: Low phase noise -160dB active crystal oscillator
- Op-amp: EXCELS V-O
- Amp: EXCELS EP-A
- Inductance: low internal resistance large current metal alloy inductance
- Button: ALPS
- Capacity: 64GB 24 Bit ECC FLASH
- Support extended capacity: 512GB micro SD card (TF)
- Use charger specifications: DC voltage input range 4.8-5.5V
- Battery capacity/type: 4000mA/H Lithium battery
- Lifetime: 15 hours
Digital Specifications
- Highest sampling rate support: PCM: 24Bit 384KHz, DSD: 11.2896MHz (DSD256)
- Support audio format: APE, AAC, ALAC, FLAC, WAV, MP3, WMA, DFF, DSF, AIFF, SACD-ISO
- EQ adjustment: 6 style adjustments
- HP output: 2-level gain adjustment
- Dop SPDIF: support
- Digital filter settings: 6 filter modes (including NOS)
- Output phase setting: 0 degrees/180 degrees
- USB connection mode: MSC mode/Audio mode
- USB DAC: support
- USB Audio delay setting: long delay mode/short delay mode
- DSD decoding settings: native DSD mode /DSD to PCM mode
3.5mm single-ended line output
- SNR: >123dB (single-ended)
- Dynamic range: >118dB (single-ended)
- Distortion + noise: <0.003%
- Frequency response: 20Hz-20KHz ± 0.8dB
- Channel separation:> 98dB 10K load
- Single-ended line output level: 2.45Vrms/1.55Vrms/ switchable design
4.4mm balanced line output
- SNR: >123.5dB (balanced)
- Dynamic range: >118.5dB (balanced)
- Distortion plus noise: <0.003%
- Frequency response: 20Hz- 20KHz ± 0.8dB
- Channel separation: > 115dB 10K load
- Single-ended line output level: 4.9Vrms/3.1Vrms/ switchable design
LO Output 3.5mm
- Maximum output power: @ 16ohm 330mW (distortion rate <0.0039% of on-load power)
- Maximum output power: @32ohm 180mW (distortion rate <0.003% of on-load power)
- Maximum output power: @300ohm 20mW (distortion rate <0.003% of on-load power)
- SNR:> 123dB
- Dynamic range: >118dB
- Distortion + noise: <0.003% @32ohm load
- Frequency response: 20Hz -20kHz ± 0.8dB
- Output impedance: 0.2 ohm
- Channel separation:> 75dB @32ohm load
- Output voltage (high volume): high gain 2.45Vrms, low gain 1.55Vrms
Balanced LO Output
- Maximum output power: @32ohm 700mW (distortion rate <0.003% of on-load power)
- Maximum output power: @100ohm 240mW (distortion rate <0.003% of on-load power)
- Maximum output power: @300ohm 80mW (Distortion rate <0.003% of on-load power)
- SNR: > 123.5dB
- Dynamic range: >118.5dB (balanced PO)
- Distortion + noise: <0.003%@32ohm
- Frequency response: 20Hz-20KHz ± 0.8dB
- Output impedance: 0.4ohm
- Channel separation:> 113dB 32ohm load
- Output voltage: high gain 4.9Vrms, low gain 3.1Vrms
Bluetooth
- Bluetooth version: 5.0
- Supported protocols: LDAC, APTX, APTXHD, APTXLL, AAC, SBC
- Transmission direction: Bluetooth of P6 is the receiving end
- Transmission distance: within 15 meters of unobstructed open space
- Bluetooth audio clock source: the clock generated by the FPGA is used as the clock source
